HEATING BUILDINGS IN INDUSTRY AND COMMERCIAL​

SUN-BEAM

GAS UNIT HEATERS

GH gas unit heater with flue gas discharge

GH air gas blowers have an exhaust outlet and a closed combustion chamber. Gas blowers with flue gas GH0618, GH0825, GH845 meet the requirements of Eco Design 2018. In the case of heating large buildings, no device works as well as gas air heaters, type GH. They are used for heating closed rooms because they have exhaust gas outlet and intake of combustion air through a chimney – a pipe in a pipe.

The fastest among the available solutions

They raise the temperature inside, regardless of their size and insulation condition. At the same time, they are economical. GH gas heaters are devices that use modern technologies, affecting not only their efficiency, but also the safety of use. This allows gas heaters to be used in all types of buildings, as well as in areas where it is desirable to heat the air quickly

Advantages of wall gas heaters

HIGH DURABILITY

They have a heat exchanger made of steel and aluminized pipes

LOW THERMAL INERTIA

They heat up the room quickly

APPLICATION FLEXIBILITY

They operate independently of each other and of the current heating system, they allow for flexible selection of power to the room volume

HIGH EFFICIENCY

High efficiency of GH heaters confirmed by the ECO DESIGN 2018 report of an independent institute

CE CERTIFICATES

They have CE certificates issued by the European Certigaz certification body. Our heaters are powered by natural gas or LPG (propane butane or propane). We deliver to the customer a heater already adapted to a specific type of gas

USEFUL ALL YEAR ROUND

In the summer season, their air supply can be used for efficient ventilation of the building

THERMOSTAT

Controlled by an electronic thermostat (the thermostat is included in the price of the heater)

AUTOMATIC ADJUSTMENT AND SIMPLE OPERATION

Option to buy the Auraton thermostat at a low price, expanded with the possibility of controlling the heater at specific times and days of the week

LOW INVESTMENT AND EASY INSTALLATION

Purchase, installation and operation are associated with low costs, especially compared to traditional systems. They are easy to install and their operation is easy

Chimney for exhaust / air intake

Fits GH0618 and GH0825 heaters. A chimney is a so-called pipe in a pipe. The outer pipe is the combustion air intake, and the inner pipe is the exhaust outlet to the outside. The exhaust outlet is 6 cm in diameter and the combustion air inlet is 10 cm in diameter. The length of the chimney is 100 cm.

Thermostat for the GH heater

Turns off the gas heater when the room temperature reaches the temperature set on the thermostat. The thermostat switches the gas heater on and off. The thermostat is included with the heater, it does not have the option to control the temperature in specific hours and days of the week. For an additional fee, you can buy the Auraton thermostat which: automatically turns the heater on and off at specific times and days of the week.

Technical data of gas heaters

ModelGH 0618GH 0825GH 0845
Type of gas
Natural gas/LPGNatural gas/LPGNatural gas/LPG
Inlet gas pressure
20/37 mbar20/37 mbar20/37 mbar
Gas pressure at the nozzle
9/24 mbar9/24 mbar9/24 mbar
Air consumption
1500 m³/h2500 m³/h4500 m³/h
Nozzle diameter
1.85/1 mm2/1.1 mm2/1.2 mm
Category
12E/13B/P12E/13B/P12E/13B/P
Input nominal power
21 kW30 kW52 kW
Rated output power
18 kW25 kW45 kW
Gas consumption
1.9 m³/h-1 kg/h2.7 m³/h-2 kg/h4.7 m³/h-3.2 kg/h
The diameter of the exhaust outlet
6 cm6 cm 15 cm
Air intake diameter
10 cm10 cm15 cm
Electrical specification
1 Ph/230 V/1 A/50 Hz1 Ph/230 V/1 A/50 Hz1 Ph/230 V/1 A/50 Hz
Destination country
PLPLPL
Level of security
IP20IP20IP20
Air ejection
4 m6 m10 m
Dimensions (w/s/g)55 x 69 x 45 cm59 x 89 x 53 cm100 x 70 x 54 cm
Weight45 kg 55 kg80 kg
Noise level
45 dB45 dB45 dB